Contents

  1. Components Identification
  2. First use: how to choose the correct power source
  3. First use: switch on and activation of wireless network
  4. First use: Setting remote control with iPhone or iPad
  5. First use: Setting remote control from a Windows computer
  6. First use: Setting remote control from a Mac computer
  7. First use: Setting remote control from an Android device
  8. First use: create a recovery drive with Windows 11 tool before installing your software
  9. First use: install your software
  10. First use: turn off EAGLE
  11. First use: installing EAGLE on the telescope
  12. First use: powering other instruments connected to the EAGLE
  13. First use: remotely control devices with EAGLE Manager X
  14. - connect or disconnect every power out port of EAGLE
  15. - set power out voltage of the 3 power out ports with adjustable voltage
  16. - connect or disconnect devices attached to the 4 USB 2.0 ports
  17. - check for power in voltage and power consumption
  18. - Set wireless or wired connectivity
  19. - Check for Inclinometer
  20. remotely turn on/off the entire telescope
  21. - change the password of the WiFi network created by EAGLE
  22. - Check for GPS data
  23. - EYE sensor data
  24. - DARK mode
  25. - GHOST mode
  26. Advanced use: EAGLE ASCOM drivers
  27. Advanced use: program connection and power to devices
  28. Advanced use: remotely turn on EAGLE with wired connection
  29. Advanced use: configure EAGLE to automatically start when power is restored
  30. Controlling the telescope remotely with Cartes du Ciel
  31. Autoguiding with PHD2 Guiding
  32. Drift Alignment using PHD Guiding
  33. Q & A
  34. Add EAGLE’s ports control in external software
  35. Troubleshooting
 
00